Naši specialisté
ARCTIC P8 TC (black black) - 80mm case fan with temperature control
Plně vybavená tiskárna pro označování krabic a balíků s možností kabelového i bezdrátového připojení. Tiskne ve šířce až 4 palce, nabízí vysokou flexibilitu a rychlost 110 mm/s. S podporou různých typů čárových kódů a jednotkovou zárukou 3 roky.
155 Kč bez DPH 128 Kč
Technické parametry
Průměr ventilátoru
80mm
Počet kusů v balení
1ks
Popis produktu
P8 TC - Pressure-optimised 80 mm Fan with Temperature Control
OPTIMISED FOR STATIC PRESSURE
During the development of the new P8 TC, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P8 TC is particularly suitable for use on heatsinks and radiators.
MAXIMUM QUIETNESS, MINIMUM VIBRATION
Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.
HIGH QUALITY BEARING
Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.
IDEAL TEMPERATURE CONTROL
The temperature sensor is on a 40 cm cable and can be placed in the warm areas of your computer. This assures temperatures no higher than 38 °C anywhere in the case and supports the cooling of your CPU or graphics card. On the other side this fan keeps the noise level absolutely minimal and only increases the speed if necessary.
TWO WAY INSTALLATION
- Push warm air out of the case
- Pull cool air into your case
TECHNICAL SPECIFICATIONS
General data
Performance
Fan Speed: 500 - 3000 rpm
Airflow: 23.4 CFM / 40.3 m3/h
Static Pressure: 1 (mm/H2O)
Noise Level: 0.3 Sone
Fan
Fan Frame: Standard
Controll Type: Temperature Control
Connector: 3-Pin-Connector
Fan Bearing: Fluid Dynamic Bearing
Electric Characteristics:
Typical Voltage: 12 V DC
Starting Voltage: 0 V
Current: 0.09 A
Cable Lenght: 400 mm
Size & Weight
Lenght: 80 mm
Width: 80 mm
Height: 25 mm
Weight: 82 g
Packaging
Width: 82.5 mm
Height: 82.5 mm
Length: 26 mm
Weight: 0.1 kg
OPTIMISED FOR STATIC PRESSURE
During the development of the new P8 TC, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P8 TC is particularly suitable for use on heatsinks and radiators.
MAXIMUM QUIETNESS, MINIMUM VIBRATION
Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.
HIGH QUALITY BEARING
Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.
IDEAL TEMPERATURE CONTROL
The temperature sensor is on a 40 cm cable and can be placed in the warm areas of your computer. This assures temperatures no higher than 38 °C anywhere in the case and supports the cooling of your CPU or graphics card. On the other side this fan keeps the noise level absolutely minimal and only increases the speed if necessary.
TWO WAY INSTALLATION
- Push warm air out of the case
- Pull cool air into your case
TECHNICAL SPECIFICATIONS
General data
Performance
Fan Speed: 500 - 3000 rpm
Airflow: 23.4 CFM / 40.3 m3/h
Static Pressure: 1 (mm/H2O)
Noise Level: 0.3 Sone
Fan
Fan Frame: Standard
Controll Type: Temperature Control
Connector: 3-Pin-Connector
Fan Bearing: Fluid Dynamic Bearing
Electric Characteristics:
Typical Voltage: 12 V DC
Starting Voltage: 0 V
Current: 0.09 A
Cable Lenght: 400 mm
Size & Weight
Lenght: 80 mm
Width: 80 mm
Height: 25 mm
Weight: 82 g
Packaging
Width: 82.5 mm
Height: 82.5 mm
Length: 26 mm
Weight: 0.1 kg
- Průměr ventilátoru
- 80mm
- Počet kusů v balení
- 1ks
Plně vybavená tiskárna pro označování krabic a balíků s možností kabelového i bezdrátového připojení. Tiskne ve šířce až 4 palce, nabízí vysokou flexibilitu a rychlost 110 mm/s. S podporou různých typů čárových kódů a jednotkovou zárukou 3 roky.